Two trestles done

Finished two Trestles over the past few weeks

    Need to catch up a bit on stuff I have been working on in the study as it has been freezing outside here in Bayswater. Yesterday it was -2 degrees at 6.15am.
    I am very happy with the progress of these two trestles. Lots of work assembling all the cross-ties as shown in a previous post then over 100 NBW's added to the longest bridge.
   For all the main timbers instead of soaking them in the alcohol/india ink solution I have stained them using a bottle of Walnut stain I picked up years ago from a scrap book store along with a Walnut Copic Brand marker pen. I used this colour as the bridges I have seen in pics of the D&RGW are coated in creosote. The Walnut gives a nice brownish look almost like creosote.
   Here are some pics of the two in progress and then in situ waiting for scenery before being set in place.

Code 70 track laid and over 100 NBW's added

Guard rail added outside as per prototype along with the 9 bents waiting to be added.

A couple of abutments

One of four bents for the second trestle.

This trestle is a scale 130 feet long.

Number two complete

In situ not too far from the town of Gunnison.

   More work is underway on a small trestle and a water tank but that will come a bit later.
Thanks all for stopping by.
Rod.

Bills beautiful SN3 layout

This is some model RR

     Finally had a few moments to go back and do a bit of editing of video I took on Bills SN3 layout back in May 2015. There is a lot more to see than what is on this however time has got in the way and I need to get back and re-shoot the new sections.
    Anyway here is the 2015 version of Bills Animos Lobato & Southern RR in Sn3.

Thanks for coming by.
Rod.

A new build project

Time to build my first trestle for the new RR

     Now that the major construction has completed (images to follow on a later post) and I have started to lay 3 mm cork for my roadbed it was time to start construction of my longest trestle.
     This trestle will be 130 scale feet in length however it will only be about 10 feet above the river (shallows) that will flow beneath.
     It will be located between duck-under number 2 near the stairs and the town of Ponca Junction. The plan is to have a series of low rapids with a few shallow water falls as I have seen in a pic of the D&RGW which the bridge will traverse.
    I began construction by cutting a bunch of Fast Track turnout ties to a scale 9 feet. These had previously been stained using the alcohol and India ink stain mixed together with some sepia for some variation. I made a jig to keep all of the ties in line after seeing the idea on therailwire. To do this I used some 1000gsm presentation board with two strips of styrene glued to it with the correct spacing.
    You can see a portion of the jig below.

   Having this jig has saved many hours as it allowed me to just keep adding ties whilst making sure they were at right angles. Once several scale feet had been set in place I added scale 14 feet timbers to each side and held these in place using Aleene's tacky glue. This stuff is amazing as it holds as soon as contact is made whilst allowing time to set them in place.
   So after a few days of adding ties and side timbers it was time to add the supports below. For these I used Walnut stained 12" x 12" timbers and glued 2 pieces side by side to strengthen the trestle. Next when they arrive will be two 12" x 18" timbers down the outside on each side.

    Once these beams had set I touched up any spots that had not seen any stain and then today set about adding nut, bolt washers to the side beams.
    I was pleasantly surprised just how fast I got this job completed. I drilled down one side with my pin vice all 52 holes then decided to give my new Dremel a whirl to do the other side. By 3pm after not starting until 11.30 am all 103 nut bolt washers were installed after first receiving a coat of Tucson Oxide Red to make them look a little rusty.
   So here is the deck almost complete just waiting for more timbers, rail and check rail to be added.

   The look is much better in person as the ties are a lot darker which is more to my liking. As I glance at more and more images of the D&RGW I notice that most of the timbers look like they are treated in creosote. I am trying to emulate that look with my Distressed Walnut Stain and I think it is working somewhat.
Rod.

Building update

Been a while

     Its been a few weeks since my last post as my wife and I did a big driving trip up as far as Mooloolaba in Queensland. Stopping at several towns on our way to and from take in the sights and stay with friends and family. Lots of interesting sights and sad to see a great deal of the country is in dire need of rain as in many places there is just nothing but dirt, no grass, no water for any of the animals and no feed. Some towns that we stopped at have had no rain since March of last year. We did over 3000klm and enjoyed every minute.
    Now that we are back I could not wait to get stuck into my layout and get the building sitting on the dining room table completed.
    Got stuck into the weathering of the roof and walls using oil paints, a quick spray of Dullcote and then a wash of Rust All rust and black washes.
   I used my Touch # 100 Walnut pen to colour the lower timbers before adding them along with my scratch built side and end doors.
   So one more building to add to the layout.
Here is a quick shot I took in the sun today.

    I am very happy the way this building has turned out.

On another note I have completed all of the timber construction including the two duck-unders. Once I have some decent pics of these I will post them here as usual.
 Thank you once again for taking the time to stop by.
Rod.

Another building for the D&RG Monarch Branch

Started to scratch build a new building

     Well it's been really cold here in Bayswater this past week and really cold in the layout room so I thought I would tackle another scratch built building.
     This time I am using my tried and tested method of using styrene. I built many buildings for the SFRSD that turned out okay so I had some material on hand and away I went.
     This is going to be a nondescript warehouse that could be sited at any of the new towns on the RR so with a few hints from pictures of Peters LosPinos & Toltec RR off I went. I marked out the size of the walls on some Slaters 4 mm corrugated siding and cut them nice and square using my (handed down from the Boss) Carl cutter. This is usually used to cut card stock for scrap-booking and card making and did a fab job of scoring the line and with just a small amount of pressure I was able to snap a nice straight line.
    Construction is pretty basic as I just used what I had at hand to re-enforce the internal side of the walls to stop them from getting out of shape. I did use some 4" stock to make stumps around the perimeter so I can add some timber along the bottom of the corrugated iron.
    So after just a few hours this is where I left off on Thursday afternoon.

  
Well that's it for this post and as we will be traveling North for a few weeks probably my last post for a while.
Rod.

Barry Davies Canadian National N Scale layout

Filmed in 2014.

     I filmed Barry's layout back in 2014 long before he decided to rip it out and start a new Layout in HOn3.
    Barry purchased the Thompson River Canyon from Vic and myself when we sold our display layout and incorporated many of the modules into his home layout.
    So alas another N Scale fallen flag Layout. At least it is recorded for history so sit back and admire Barry's Canadian National Edison Sub.

Thanks for stopping by once again.
Rod.

Work in progress #5

Been working on a mine

     As it has been so cold this past week or more I decided to stay warm in the house and scratch build a mine for the RR.
    There are just so many mines in Colorado it is quite hard to decide just what will work so instead of purchasing a kit I decided that I would like something that no body else has along with what will fit in the area I want the mine to be placed.
     To get started I copied a plan of a J&J Pyrite mine of the web and then set about making changes as I drew up an elevation drawing that was to my liking.
     Once this was settled in my mind I started to stain all of the Basswood I purchased with MINWAX stains given to me by Bill. There is four different colours of stain and thirty lengths of strip wood each twenty four inches long. It didn't take that long to get them all stained and cut to a length of thirteen scale feet.
     The week before I purchased a sheet or two of 1000gsm black presentation board that I used to mock up the walls as a support for all the strip wood. Quarter inch balsa wood was used along the inside edges to help keep the walls straight and for each wall to attach to.
     It took all week to get the strip wood on and get the roof profile fitted. On Friday night I cut black craft paper (given to me by the boss) into strips four feet wide to use as tar paper for the roof area.
     Aileen's Tacky glue was used for all the surfaces and boy does it work well.

Well here is a few shots after completing the build today 

 

     The roof received a coat of Tamiya Flat Black followed by a dry brush of Grimy Black then a dusting of Raw Sienna while the walls received a dry brush of Green Earth powder that I have had for well over 30 years I think. I made the nail holes using a black 0.05 pen in a random fashion.
     All in all this has been a fun build.
Rod.